Home » Blog & Press » 2012

IQD News Posts 2012

2024 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011

IQD launches new ultra high stability OCXO at Embedded World 2013

EMBEDDED WORLD 2013 PREVIEW PRESS RELEASE  IQD launches new ultra high stability OCXO at Embedded World 2013

Posted: 14th December 2012
EMBEDDED WORLD 2013 PREVIEW PRESS RELEASE IQD’s new IQOV-70 series ultra high stability OCXO which is launching at Embedded World 2013 is designed for use in next generation multimode base station platforms. Operating at a frequency of 10MHz, the new model achieves a frequency stability of ±3ppb (parts per billion) over the operating temperature range of -10 to +70… Read More

IQD launches new low phase noise and low power clock oscillator

IQD launches new low phase noise and low power clock oscillator

Posted: 13th November 2012
IQD’s new CFPS-115 crystal clock oscillator offers two key features; low phase noise and low current consumption. At 40.0MHz the phase noise performance is -80dBc/Hz at 10Hz offset and -145dBc/Hz at 1kHz offset, figures which are around 5dBc better than similar design parts. In addition, the new model offers low power consumption of around only 7mA; this compares with a… Read More

Electronica launch for IQD’s new industrial temperature range SMD OCXO

Electronica launch for IQD’s new industrial temperature range SMD OCXO

Posted: 13th November 2012
IQD have extended the performance of their IQOV-90 series high stability low phase noise OCXOs to encompass the full standard industrial temperature range of -40 to 85°C. High operating temperature ranges are significantly more technically challenging in OCXOs than for other frequency products. By increasing the internal crystals turnover point to a safe margin above… Read More

IQD launches new series of fast make programmable oscillators with class leading phase jitter performance

IQD launches new series of fast make programmable oscillators with class leading phase jitter performance

Posted: 10th October 2012
The short lead-times offered by programmable oscillators are typically offset by relatively poor performance in comparison to standard crystal clock oscillators, especially as regards phase noise and jitter. IQD’s two new ranges of programmable oscillators offer the best of both worlds with phase jitter performance comparable to traditional crystal oscillators combined… Read More

IQD introduces ground-breaking new quartz crystal range that delivers significant space and cost saving

IQD introduces ground-breaking new quartz crystal range that delivers significant space and cost saving

Posted: 14th September 2012
ELECTRONICA 2012 PREVIEW PRESS RELEASE IQD has launched two new quartz crystal models housed in unique innovative packages that deliver significant space and cost saving whilst still utilising tried and tested technology. The new surface mount IQXC-74 measures just 7 x 4mm with a height of 2.3mm – this compares with the similar current industry standard HC49/4HSMX… Read More

IQD Launches New High-Temperature, High-Shock Clock Oscillator

IQD Launches New High-Temperature, High-Shock Clock Oscillator

Posted: 23rd May 2012
IQD has launched a newly designed high - temperature clock oscillator. The new LHAT series is housed in a 7x5mm dual hermetically sealed ceramic package with gold plated kovar leads attached using a robust eutectic brazing process. The oscillators are capable of operating at temperatures from +25 to +200 degrees C. The LHAT series is available with a frequency range of… Read More

IQD to Support ONE-NET Open-Source Wireless Control Standard

Press Release Image

Posted: 18th April 2012
IQD Frequency Products have announced that they have joined the ONE-NET open-source wireless networking alliance. The ONE-NET wireless standard is the world’s foremost multi-vendor, open source wireless control protocol. ONE-NET was specifically designed for optimized home control applications and includes important features such as integrated peer-to-peer operation. It… Read More

IQD launch new tight stability ‘Real Time Clock’ at Embedded World 2012

Press Release Image

Posted: 28th February 2012
IQD have launched a newly designed tight stability Real Time Clock (RTC) which incorporates a 32.768kHz crystal with a Digital Temperature Compensated Crystal Oscillator (DTCXO). This Surface Mount RTC is housed in a plastic package with a FR4 base measuring just 10.0 x 7.4mm. The new IQRC-100 series has an I 2 C-Bus* (400kHz) interface with a CMOS output allowing the… Read More