New TCVCXO from IQD delivers ±0.14ppm stability in a 5 x 3.2mm package
Posted: 27th May 2014
IQD’s new IQXT-210 series TCVCXO, offers frequency stabilities down to ±0.14ppm over the full industrial temperature range of -40 to 85 degrees C. This new model is approaching OCXO performance levels, whilst being packaged in a miniature 8-pad 5 x 3.2mm package.
Powered from a 3.3V supply the IQXT-210 has a typical current draw of only 12mA dependent upon the frequency, which can be specified between 10MHz to 50MHz. 11 standard frequencies are initially offered, including 12.8MHz, 19.2MHz and 26.0MHz.
Output can be specified as either HCMOS, 15pF load or Clipped Sine, into 10k Ohms load. The oscillator can be specified to include various pulling range options, from ±5ppm to ±10ppm and also ±10ppm to ±15ppm. This enables the frequency to be adjusted by a fixed amount for various applications and also allows for the oscillator to be used remotely.
The IQXT-210 is primarily designed for low power consumption applications such as Femtocells, Smart Wireless Devices, Fibre Optic Networking (PON), Microwave Satellite Communications, LTE/4G Base Stations, Backhaul Infrastructure, Packet Transport Network (PTN) Computer Networking, RF Modules, Wi-Fi plus Test & Measurement Equipment.
Phase noise performance is -148dBC/Hz at 10kHz offset and short term stability is down at 5E-10/S. All devices are RoHS compliant, reflow soldering compatible and supplied on tape and reel. Further information and the full data sheet is available at www.iqdfrequencyproducts.com.