IQD News Posts 2014
2024 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011
New miniature LVPECL/LVDS VCXOs launched by IQD at Electronica
Posted: 13th November 2014
With growing demand for high speed data transmission IQD is introducing at Electronica the new IQXV-80 and IQXV-81 series LVPECL/LVDS Voltage Controlled Crystal Oscillators ( VCXOs ) to their range. Low-Voltage Positive Emitter-Coupled Logic (LVPECL) outputs are typically chosen for their compatibility with high-speed ICs whilst Low Voltage Differential Signalling (LVDS)… Read More
Electronica launch for IQD's new GPS disciplined OCXO
Posted: 27th October 2014
IQD’s newest addition to its range of advanced oscillator modules is its IQCM-110 series of GPS disciplined OCXOs. Being unveiled at Electronica 2014, the new design incorporates an internal GPS receiver with a 1PPS output and is housed in a 14-pin 60mm square package. When coupled to an external aerial via the incorporated SMA connector, in the event of the loss of the… Read More
IQD’s new specialist high shock oscillator also delivers high temperature performance
Posted: 12th September 2014
The new SQXO-2ATHG range of very high shock survivability oscillators launched by IQD are housed in a TO-39 package and can withstand shock levels of up to 8,000g for 0.5ms, ½ sine. They are designed primarily for applications such as underground boring tools, down hole instrumentation and avionics applications including flight recorder equipment and on board computers… Read More
New tight stability clock oscillator from IQD offers two different package sizes
Posted: 16th July 2014
IQD’s new range of tight stability clock oscillators, which are at the forefront of modern clock oscillator design, deliver frequency stabilities as low as ±10ppm over the full industrial temperature range of -40 to 85 degrees C. Two versions are available offering different ceramic package sizes; the IQXO-445 series is housed in a 2.5 x 2.0mm package while the IQXO-430… Read More
IQD’s launches new ±0.2ppb OCXO at IMS 2014
Posted: 4th June 2014
IQD’s new IQOV-164 series oven controlled crystal oscillator ( OCXO ) delivers exceptional frequency stability performance at ±0.2ppb over an operating temperature range of -20 to 70 degrees C. This new ultra high stability model can also be specified to operate over a wider -30 to 75 degrees C temperature range with only a minor drop in temperature stability performance… Read More
New TCVCXO from IQD delivers ±0.14ppm stability in a 5 x 3.2mm package
Posted: 27th May 2014
IQD’s new IQXT-210 series TCVCXO, offers frequency stabilities down to ±0.14ppm over the full industrial temperature range of -40 to 85 degrees C. This new model is approaching OCXO performance levels, whilst being packaged in a miniature 8-pad 5 x 3.2mm package. Powered from a 3.3V supply the IQXT-210 has a typical current draw of only 12mA dependent upon the frequency… Read More
New ultra miniature OCXO from IQD delivers ±5ppb stability in a 14 x 9mm package
Posted: 22nd April 2014
In an industry standard package measuring just 14 x 9.0mm and with a height of only 6.5mm, IQD’s new IQOV-162 series OCXO provides a frequency stability down to ±5ppb (parts per billion) over the full industrial temperature range from –40 to 85 degrees C. In addition to this exceptional size/performance ratio the new model is available in a very wide frequency range from… Read More
New GPS advanced OCXO module from IQD designed for LTE & 4G base stations
Posted: 27th March 2014
IQD’s new IQCM-100 GPS advanced OCXO module for use in LTE and 4G base stations achieves a holdover specification of 1.5 microseconds over a period of 24 hours when locked to a 1PPS (Pulse Per Second) input from an external GPS receiver, easily meeting industry standard holdover requirements. Incorporating an adaptive algorithm which has the ability to ‘learn’ from a… Read More
IQD’s new microcomputer-compensated crystal oscillator delivers ±50ppb stability in a 7 x 5mm package
Posted: 25th February 2014
Launched at Embedded World 2014, IQD’s new IQMT-100 series Microcomputer Compensated Crystal Oscillator (MCXO) offers customers OCXO performance in a standard clock oscillator sized package. The design enables a frequency stability of ±50ppb (parts per billion) over the full industrial operating temperature range of –40 to 85 degrees C whilst maintaining an extremely… Read More
New analogue compensated TCXO from IQD delivers a frequency stability down to ±0.28ppm
Posted: 27th January 2014
Portable instrumentation equipment and communications systems (fixed and mobile) frequently require a high stability oscillator but don’t have either the physical space for or power to drive an Oven Controlled Crystal Oscillator ( OCXO ). IQD's latest TCXO launching at Embedded World 2014 provides a practical alternative and is designed specifically for such… Read More
IQD celebrates 40th Anniversary
Posted: 15th January 2014
Since starting in 1973 in the UK, IQD have expanded globally with operations in Germany, France, Asia & North America. IQD would like to thank all our customers & business partners for their continuing support. Read More