IQD News Posts 2020
2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011
AKM factory fire affects lead times and pricing of IQD’s components
Posted: 22nd December 2020
Due to a fire at ASIC supplier Asahi Kasei Microsystem (AKM) supplies of IQD’s TCXOs, OCXOs and Clock Modules are affected. Consequently, this affects the company’s lead times and prices of the products mentioned. These effects are driven by a global shortage of AKM semiconductor chips, used in a substantial amount of TCXO, OCXO and Clock Module components. Please find… Read More
IQD targets applications for battery-powered products with new tight stability, variable supply voltage clock oscillator
Posted: 11th November 2020
IQD Frequency Products has launched a new tight stability and variable supply voltage crystal clock oscillator which operates with a supply voltage range from 1.6 V to 3.63 V. The IQXO-951 25TS series delivers a frequency stability performance down to ±5 ppm over the full industrial temperature range of - 40 to 85 degrees C. Housed in a 2.5 x 2.0 mm package the new clock… Read More
November Corona Virus Company Statement
Posted: 5th November 2020
BUSINESS AS USUAL As COVID-19 continues to spread across the globe, our priorities are the safety and well-being of our employees, customers and partners, families, and the communities in which we live and work. Since the UK Government announced further measures to slow the spread of Covid 19, IQD have implemented further practices to protect our employees as best we… Read More
IQD launches new variable supply voltage oscillator
Posted: 27th October 2020
Many of today’s industrial and consumer applications require batteries as power source. Therefore, products need to handle a change in voltage as the battery discharges. This can lead to design issues when using a standard oscillator with a fixed supply voltage. A discharging battery may cause a decrease in the source voltage, which consequently change the frequency of… Read More
Corona Virus Company Statement
Posted: 12th August 2020
Dear Valued Customers, COVID-19 is still a serious threat and our priority remains the safety and well-being of our staff, customers and partners, families, and the communities in which we live and work, where we are continually reviewing our processes and procedures and monitoring latest Government advise on emerging from lockdown and returning to work. With lockdown… Read More
IQD launches a new GNSS disciplined OCXO
Posted: 31st March 2020
IQD’s newest addition to its range of advanced oscillator modules is its IQCM-112 series of disciplined OCXOs. This new design incorporates an internal GNSS receiver with a 1PPS output which is compatible with an external GPS, GLONASS, BEIDOU and GALILEO source and is housed in a 14-pin 60mm square package. When coupled to an external aerial via the incorporated SMA… Read More
New Ultra Small Low Noise Low Power OCVCSO
Posted: 19th February 2020
IQD Frequency Products has launched a range of high frequency Oven Controlled Voltage Controlled SAW Oscillators (OCVCSOs). Three frequencies are currently available in the OCVCSO series, 400MHz, 800MHz and 1.2GHz and they are packaged in a 25.4 x 22 x 13.2mm industry standard SMD package. These OCVCSOs have a noise floor of 10dB to 15dB lower than an OCXO at the same… Read More